LED pick and place machine

Model: SUNY-T510LP4
Mounting Head Quantity: 4

Description:

SUNY-T510LP4 is an LED desinged pick and place machine with 1.2M moving table,it has 4 heads with 8pcs Yamaha feeders supported. It not only support all kinds of LED,but also 0402,0603,0805-5050, SOP,QFN,LQFP,Diode,Transistor .it has top and down two cameras vision system.Yamaha pneumatic feeder and Juki Nozzle are mature products, they are accept by customers in market,very stable and convenient! This machine for small smt production is your good helper!

It is very suitable for small and medium company and factories!

The operation system is industry level embedded Linux system, the main board of machine was researched by ourself,which is more relaible than windows system, and life time is much longer. Please purcahse it with confidence.

Specification

Dimensions	2060mm(L)×605mm(W)×700mm(H)
Weight	145kg
Power Supply	AC220V (50Hz, single phase)/AC110V (60Hz, single phase);400W
Air Supply	0.5MPa ~0.7MPa
Vacuum Generation	Built-in vacuum pump
Mounting Head Quantity	4
Mounting Speed	11000cph(optimal without vision detection); 5500cph (optimal with vision detection)
Control Accuracy	0.015mm
Component Type	0402/0603～5050/SOT/SOP/QFP/QFN/BGA, etc. (resistor/capacitor/diode/triode/LED/IC, etc.)
PCB Thickness	0.6mm~3.5mm
PCB Size	10mm(L)×10mm(W)～1200mm(L)×240mm(W)
PCB Conveying	Manual operation
Nozzle Change	Manual operation
Control System	Built-in computer (embedded Linux operating system), 7-inch touch screen
Drive System	X&Y-axis driven by stepping motors in the way of closed-loop control; Z-axis capable of reset detection;all motors adopting flexible S-curve acceleration and deceleration
Transmission System	Synchronous belt+linear guide
Feeding System	8 Yamaha standard pneumatic feeder stacks, Yamaha electric feeder supported
Vision System	Up-looking camera for component automatic calibration (component size applicable: 22mm×22mm); down-looking camera for PCB calibration via Mark Point and component positioning